Rotary shear cut to length line is composed of decoiler, peeler, leveller, length measuring unit, rotary shear, double station stacker; Compared with the start-stop shearing line, the rotary shearing line can realize the non-stop blanking of the plate, with faster speed, better precision and better surface protection. Each of these functions is performed by our machines, which are designed to …
BRIEF INTRODUCTION OF 6HI LEVELLER:
1. The 6hi leveller is mainly composed of frame, work rolls, intermediate rolls, and back-up rolls, transmission system, power system and control system. 2. The work rolls is made of 9Cr2MoV which is with hardness of 62HRC, which is very good for processing the hard material like stainless steel. The numbers of work roll is 21pcs(10pcs upper and 11pcs lower), …
How does the roller straightening machine work?
A straightening machine is the equipment for straightening metal profiles, bars, pipes, wires, etc. How does the roller straightening machine work?
What is the roller straightening?
Roller straightening machine is a straightening machine that uses two rows of staggered straightening rollers to bend the rolled material repeatedly to correct the rolled material.
How to avoid common defects in metal shearing?
Metal shear defects are also found in the metal shear process. Persistent problems such as rough edges of burrs, edge distortion, distortion, bending, or bending are all defects that can be corrected with the right machine.
What is a coiler in the Sheet metal industry?
Coiler also called recoiler, which is the auxiliary equipment in the rolling workshop for slitting coiling hot-rolled or cold-rolled steel into a roll shape
What is a decoiler in the slitting line process?
The decoiler is also called uncoiler, which is a special equipment for metal plate leveling. The body is a welded box structure.
Metals Processing Cold Roll Forming: Advantages of Cold Rolled Steel
“Cold rolling” refers to the process that steel goes through before it becomes the final product. Cold rolled steel, sometimes abbreviated as CRS.
Roll Forming Line Is Ready For Exported
Roll forming line for baseboard of shelving rack.
What should be done about the common burr and radian in the process of coil slitting line process？
In many steel machining centers in the plate cutting and shearing slitting line process, there will be some similar common problems.